FOX seatpost 2021 Transfer P-SE Performance internal | 125 mm
The FOX Transfer has been redesigned from the ground up with superior features for the coming season. The weight was reduced, the insertion depth and length reduced and the ease of maintenance increased. The revised clamping head now offers better clamping and a reduced overall height.
Vario seat posts are very trendy, be it on the Transalp, on enduro tours or on the small evening round of the house. Just steep uphill, now a little downhill or tricky trail. With a Vario seat post, you always have the optimal sitting position, without the hassle of adjusting it with a quick release.
Fox is launching its “Saddle Lift” with the Transfer Performance Elite Series. Equipped with the identical Kashima Coat coating as used for the suspension forks and dampers, the transfer is the ultimate addition to your Fox suspension!
It scores with an infinitely adjustable saddle height. Different lever designs ensure that it fits perfectly to any switching system. The remote lever not only controls the saddle height, but also the speed of the height adjustment.
With this version, the cable is laid inside, so that annoying cables remain outside. When choosing where to hold the cable, Fox chose to route it to the end of the support, where a small barrel will hold the cable. There are no fiddly screws or complicated voltage systems. If need be, removing the support without tools becomes child’s play. The cable is then pushed through to the remote and clamped using a small nut. The tension is fine-tuned by means of a cable adjustment directly on the remote control.Technical specifications:
Application: MTB, tour, gravel
Material: aluminum
Material screws: steel
Operation: via remote lever with internal control, compatible with Fox and Race Face (not included in delivery) Diameter: 30.9 or 31.6 mm
Length (A): 365 mm (when extended)
Adjustment range (B): 125 mm
Minimum insertion depth (C): 128 mm (including control)
min. possible usable height (D): 165 mm
Max. Possible usable height (E): 265 mm (upper edge of seat clamp to lower edge of saddle frame)
Offset: 0 mm
Compatibility seat stays: round (7×7 mm) and oval (7×9 mm)
How it works: pneumatic / hydraulic
Feature: Black Ano coating
Max. Driver weight: not specified
Color: matt black (lower part) glossy black (dip tube)
Weight according to the manufacturer: approx.494g (30.9 x 125 mm)
Weight weighed: 536g (31.6 x 125 mm)Scope of delivery: 1xFOX seatpost 2021 Transfer P-SE Performance internal | 125 mm , without remote lever
Note: The remote lever required for operation must be ordered separately, here you can
choose between different brands and designs for singleor double, triple drives!
This seat post has an internal control. This means that the train must be routed through the frame (seat tube). Please make sure that your frame is intended for the use of supports with internal control!
Fox Transfer manual
Reviews
There are no reviews yet.